Ship motions

Page last edited 1,217 days ago
From The World of Seikai
Jump to navigation Jump to search


Ship motions are defined by the six degrees of freedom that a ship, boat or any other craft can experience.

Reference axes[edit | edit source]

See also: Wikipedia:Aircraft principal axes

The vertical/Z axis, or yaw axis, is an imaginary line running vertically through the ship and through its centre of mass . A yaw motion is a side-to side movement of the bow and stern of the ship.

The transverse/Y axis, lateral axis, or pitch axis is an imaginary line running horizontally across the ship and through the centre of mass. A pitch motion is an up-or-down movement of the bow and stern of the ship.

The longitudinal/X axis, or roll axis, is an imaginary line running horizontally through the length of the ship, through its centre of mass, and parallel to the current motion vector or heading. A roll motion is a side-to-side or port-starboard tilting motion of the superstructure around this axis.

Rotational[edit | edit source]

control axis
For other uses, see: Wikipedia:Euler angles#Tait–Bryan angles

There are three special axes in any ship, called longitudinal, transverse and vertical axes. The movements around them are known as roll, pitch, and yaw respectively.

Pitch
The up/down rotation of a vessel about its transverse/Y (side-to-side or port-starboard) axis. An offset or deviation from normal on this axis is referred to as trim or out of trim.
Roll
The tilting rotation of a vessel about its longitudinal/X (front-back or bow-stern) axis. An offset or deviation from normal on this axis is referred to as list or heel. Heel refers to an offset that is intentional or expected, as caused by wind pressure on sails, turning, or other crew actions. The rolling motion towards a steady state (or list) angle due to the ship's own weight distribution is referred in marine engineering as heel. List normally refers to an unintentional or unexpected offset, as caused by flooding, battle damage, shifting cargo, etc.
Yaw
The turning rotation of a vessel about its vertical/Z axis. An offset or deviation from normal on this axis is referred to as deviation or set. This is referred to as the heading of the boat relative to a magnetic compass (or true heading if referenced to the true north pole); it also affects the bearing.

Translational[edit | edit source]

Heave
The linear vertical (up/down) motion; excessive downward heave can swamp a ship.
Sway
The linear transverse (side-to-side or port-starboard) motion. This motion is generated directly either by the water and wind currents exerting forces against the hull or by the ship's own propulsion; or indirectly by the inertia of the ship while turning. This movement can be compared to the vessel's drift from its course.
Surge
The linear longitudinal (front/back or bow/stern) motion imparted by maritime conditions.

Stabilization[edit | edit source]

There are methods for both passive and active motion stabilization used in some designs. They include static hull features such as active reaction control system (RCS) or active mechanical devices like counterweights or flywheels, antiroll tanks and stabilizers.

See also[edit | edit source]

References[edit | edit source]